User's Manual

1 DATECS BLUELITE V2 USER MANUAL
13
Bluetooth Pairing
Turn on BlueLite v2, connect it to PC via USB cable. When device is connected to PC, will create virtual
COM port. Check on device manager on which port is connected. After that run the special application
for PC (Fig. 3). Press “Search” button on the app, and in right side will be show all available COM ports.
Select on which is connected device, then press “Connect to device”. From Bluetooth management on
mobile device (equipped with BLE 4.2) select connect to BlueLite v2, then on mobile device screen will
be show PASSKEY (Fig. 6). White LEDs will start to light one by one continually, on special app will be
show Passkey (Fig. 4), if they are same press “Paring button” on BlueLite v2 to confirm (Fig. 5), then
special app return message “THE DEVICES ARE CONNECTED” (Fig.7 when on both device is confirming
pairing). If Passkey is being different press “On/Off” button on BlueLite v2 to cancel pairing.
Figure 7
Figure 3
Figure 4
Figure 5
Figure 6