User's Guide

1 DATECS
BLUEPAD-5000 USER GUIDE 1 DATECS Page 16 of 25
KEYS DOWNLOAD
To download the Acquirer Initial Keys (AIK) the PINPAD has to be set in Keys Download
Mode, in which it exchanges information in a secure way through the RS-232 interface using
proprietary communication protocol.To exit the mode the button has to be pressed.
CLEAR DEA KEYS
Deletes the customer’s DEA key hierarchy.
EXIT
Exit the service menu forwarding the control to the application.
APPLICATION DOWNLOAD MODE
To enter application download mode on the BLUEPAD-5000, the button has to be
maintained pressed while switching on the PINPAD. A characteristic sound is played and on
the display appears the name and version of the Secure Boot Loader.
The message - MODE: FW/APP is displayed and the PINPAD listens for application
download commands on the serial interface.
When application download is initiated, on the display is shown the progress in percentages
of the downloading process.
To exit the mode, press or buttons.
The Application download process shall not be interrupted to prevent memory corruption. If
the buttons or are pressed during the downloading process, the application
integrity checking will fail on booting up and process will have to be repeated.
COMMUNICATION PARAMETERS
The default RS232 serial port communication parameters are the following:
115200bps
8bit
2stop bit
no parity
The default USB VC serial port communication parameters are the following:
115200bps
8bit
1 stop bit
no parity