User's Manual

1 DATECS Linea Pro 5 User manual
`
Using the 2D barcode scanner:
The Linea Pro 5 2D uses a scan engines that supports one-dimensional (1D)
and two-dimensional (2D) barcode symbols. The effective reading distance of the
barcode reader varies depending on the barcode size.
Scanning 2D Barcodes:
To scan a 2D barcode fist activate the scanner. Then position the scanning
head to the center of the barcode by aiming with the red laser beam and the
illumination box is over the outer edges of the barcode, as shown in the figure below.
Slowly pull back the unit, while increasing the distance between the barcode
and the scanning head, until the barcode has been read by the scanner.
Linea Pro 5 supports different types of scan:
- Single Scan
- Multi Scan
18
Scan Button
Reading distance is depend
of the barcode size