User's Manual

1 DATECS DPP-450 User manual
27
41 ESC D Setting horizontal tab position
42 ESC E Specifying/Canceling highlighting
43 ESC F Filling or inverting the page area in page mode
44 ESC G Specifying/Canceling highlighting
45 ESC I Specifying/Canceling Italic print
46 ESC J Printing and Paper feed n/203 inches
47 ESC L Selecting page mode
48 ESC N Reading programmed serial number
49 ESC R Selecting country
50 ESC S Specifying speed (bps) of the serial port
51 ESC T Printing short self test
52 ESC U Selecting/Canceling underlined printing
53 ESC V Selecting/Canceling printing 90°- right turned characters
54 ESC W Defining the print area in page mode
55 ESC X Specifying max printing speed
56 ESC Y Selecting intensity level
57 ESC Z Returning diagnostic information
58 ESC \ Specifying relative horizontal position
59 ESC ] Loading the default settings stored in Flash memory
60 ESC ^ Saving current settings in Flash memory
61 ESC _ Loading factory settings
62 ESC ` Reading the Battery Voltage and Thermal head temperature
63 ESC a Aligning the characters
64 ESC b Increasing text line height
65 ESC c5 Enabling/Disabling the functioning of the button LF
66 ESC d Printing and feeding paper by n- lines
67 ESC i Feeding paper backwards
68 ESC o Temporarily feeding paper forward
69 ESC pair= Enabling/Disabling PAIRING info saving in Bluetooth mode
70 ESC pwd= Programming a new Bluetooth password (PIN)
71 ESC r Full command for sounding buzzer
72 ESC s Reading printer settings
73 ESC u Selecting code table
74 ESC v Transmitting the printer status
75 ESC x Setting the time interval for automatically switching Off the
printer
76 ESC y Setting USB response strings
77 ESC { Enabling/Canceling printing of 180° turned characters
78 GS FF Printing in page mode and returning to standard mode
79 GS $ Specifying the absolute vertical position in page mode
80 GS ) Setting printer flags (memory switches)
81 GS * Defining a Downloaded Bit Image (logo)
82 GS / Printing a Downloaded Bit Image
83 GS : Starting/ending macro definitions
84 GS B Enabling/Disabling inverse printing (white on black)
85 GS C Read the Real Time Clock
86 GS H Selecting printing position of HRI Code
87 GS L Setting the left margin
88 GS Q Printing 2-D barcodes