User's Manual

1 DATECS DPP-250 User manual
12
2. When the adapter is switched ON the BATT LED diodes are lighting as shown on
the illustration in Section "Charging the Battery", up to full battery charging.
3. When reading a Magnetic Card, the BATT LED are lighting simultaneously in both
directions – from the middle outwards to the left and right.
BT
1. It lights blue when PAIRING.
Table 4
8. Loading Paper
The DPP-250 uses a drop-and-load design making paper loading
easy and trouble free. To load paper, simply lift up the paper cover latch
and drop in the new roll as shown in the steps below.
1. Slide the paper cover latch to unlock
the paper cover as shown in the
figure on the right.
2. Lift the paper cover latch to open the
paper cover as shown in the figure on
the left.
3. Drop in the new roll of thermal
media as shown in the figure on the
right.
Be sure to pull at lease 12 mm or
more of media above the top
of the printer before closing.
4. Close the paper cover until it snaps lock.
5. Slide paper cover latch to lock the cover in place.