User's Manual

1 DATECS DPP-250 User manual
16
Figure 10
10.3 Memory Switch Settings
The DPP-250 uses nonvolatile memory for storing some of the
printer default configuration. The following table shows the available
options.
Memory Switch Options
Memory Switch
(see command reference GS
command)
1000000010
BAUD RATE 115200 bps
POWER OFF TIME 10 minutes
PRINT DENSITY 100%
CHARACTER TABLE WESTERN (1252)
Table 7
10.4 Setting Memory Switch
MEMORY SWITCH SETTINGS:
Step #1: Make sure the printer is OFF (ERR LED is OFF) before
performing step #2.
Step #2: Press and hold the power (LF) button. The ERR LED
flashes red / green every second.
Step #3: Release the (ON) button in about 6 sec. and wait
for the printer to print out the current memory settings.
Follow the printer instructions to make the necessary changes.