User's Manual

1 DATECS DPP-250 User manual
19
The following default configurations are used for the different
communication methods.
• Communication with PDA device
• Via Bluetooth/ USB/ Serial:
Memory Switch Options
Memory Switch ( 1 thru 10 ) *******010
Physical Switch Options
DIP Switch (1, 2, 3 ,4) *, OFF, OFF, ON
Table 8
• Communication with PC (using windows printer driver)
• Via Bluetooth/ USB/ Serial:
Memory Switch Options
Memory Switch ( 1 thru 10 ) *******011
Physical Switch Options
DIP Switch (1, 2, 3 ,4) *, OFF, OFF, OFF
Table 9
• Service mode (changing printer settings, loading firmware)
communication with PC
• Via Serial
Memory Switch Options
Memory Switch ( 1 thru 10 ) *******011
Physical Switch Options
DIP Switch (1, 2, 3 ,4) *, OFF, *, ON
Table 10
* - depending on user requirements can be 1 or 0
Notes: When not using Driver/SDK developer tools, set DIP Switch 4
to OFF.
12. Connecting Device
The DPP-250 is designed to use different methods of
communications. Care must be taken to ensure that the DPP-250
USB or Serial connector and PDA & Smartphone connector are not
accidentally damaged. The figures below show how to attach the
different device to the DPP-250.