User's Manual

1 DATECS DPP-250 User manual
9
User Notes:
Compatibility depends on the type of communication method
“Serial / USB / Bluetooth®” your PDA or Smartphone supports and
the availability of DPP-250 driver for your device.
 Determine the method of communications your device supports.
 Next determine if your device is supported by the DPP-250 Drivers &
SDKs.
Because of the continually evolving Driver & SDK to support new
mobile devices, visit our developer web site at:
http://www.datecs.bg
4. Getting Started
The DPP-250 allows you to printer information from your PDA &
Smartphone. Before using the DPP-250 thermal printer the battery should
be properly charged. The following Quick Start guide will help to get
your DPP-250 ready for use.
Quick Start:
Steps What to do Purpose Where to find more
1
Charge the DPP-
250 Rechargeable
battery pack as
recommended in
this manual
The Lithium Ion battery pack
should be fully charged before use
to ensure long battery life.
Charging Battery, Page 8
2
Load DPP-250
print media
(Thermal Paper)
DPP-250 requires Thermal paper
for printing. Loading Paper, Page 9
3
Setup Bluetooth
Pairing
Setup Bluetooth® pairing to allow
DPP-250 to communicate with
Bluetooth®
Bluetooth® Setup, Page 19
4
Install DPP-250
Software
To print information from
your device, software needs to
be installed onto your device.
Printing software is not
provided by Datecs.
Please contact your
DPP-250 reseller for
recommendations on
Third-Party solutions.
Developers should refer to
the section in this manual
on “Developing Solutions”.
Table 3