DATECS Infinea Tab M (CTLS, ICCR and MSR) User Manual
1 DATECS INFINEA TAB M USER MANUAL LEGAL NOTICE “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to the iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
1 DATECS INFINEA TAB M USER MANUAL REVISION HISTORY Version Data Change description 1.0.0 11.07.2016 First Release 2.0.0 16.01.2016 All Document 3.0.0 04.07.2017 All Document 3.1.0 02.08.2018 Added Section “REGULATORY” UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL REGULATORY FCC ID: YRWITMC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment.
1 DATECS INFINEA TAB M USER MANUAL CONTENTS TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6 GENERAL VIEW ........................................................................................................................................................................ 8 GETTING STARTED ..........................................................................................
1 DATECS INFINEA TAB M USER MANUAL TECHNICAL SPECIFICATIONS Processor Memory Application Memory ARM Cortex® M3 Security Microcontroller 64KB Internal ROM 256KB Internal RAM 1MB Internal Flash 4MB Serial Flash Keypad • 1 button for device turning ON/OFF • 1 button for scanning barcodes Magnetic Card Reader • 3-track bi-directional reading • ISO 7810, 7811 and 7813 Smart Card Reader ISO7816, EMV L1 certified Contactless Card Reader (option) ISO/IEC 14443 Type-A/MIFARE: - MIFARE MINI - MIFARE CLASS
1 DATECS INFINEA TAB M USER MANUAL Use only original equipped DATECS cable (SYI-0120/SYI-0120A) for charging Apple device. Use only UL approved USB adapters. The minimum requirements of USB adapter is 5V/2.1A! Waste Electrical & Electronic Equipment The symbol means that according to local laws and regulations your product shall be disposed of separately from household waste at the end of its working life.
1 DATECS INFINEA TAB M USER MANUAL GENERAL VIEW UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL 1. On/Off Button 2. Button for starting scanning barcodes 3. Opening for inserting smart card 4. Contactless reader 5. LEDs indication for Contactless transaction 6. Magnetic stripe reader 7. Barcode engine 8. Lightning connector 9. Micro USB port 10. Indication LEDs 11. Charging pads UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL GETTING STARTED Infinea Tab M has rechargeable Li-ion battery. Can be charge from USB port or Charging pads. Before first use, battery must be fully charged. If the device is fully discharged, charging time to fully charged would be approx. 6 hours. Depends of the settings, Infinea Tab M can pass-through input power supply from USB connector or Charging pad to Apple device. Charging current to Apple device can be selected. Charging form USB adapter: UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL Table for Infinea Tab M status LED: LED1 indication Description No indication Device is turned off/sleep mode Blue Indication (blinking) Device is in active mode/wake up LED2 indication Description Green indication (blinking) Infinea Tab M is charging from outside power supply (from USB connector or Charging pads) Green indication Infinea Tab M mini is fully charged, can be disconnect the outside power supply No indication Not charging(no outside power) or
1 DATECS INFINEA TAB M USER MANUAL ATTACHING APPLE DEVICE TO INFINEA TAB M Infinea Tab M and Apple device must be turn to top side, showed on picture below. After that Apple device must be sledded to Infinea Tab M lightning connector. UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL OPERATION MODES For start operating with Infinea Tab M is need to be attached Apple device and installed application for iOS. For downloading the latest SDK please contact with your distributor: For turn On Infinea Tab M press On button and unlock Apple device screen. When the Infinea Tab M is active blue LED on front side will blink. If the blue LED is not blinking Infinea Tab M is turned off. UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL Scanning barcodes Infinea Tab M can scan 1D and 2D barcodes. To scan barcode first, activate the scanner (by pressing and holding the scan button). Then position the scanning engine to the center of the barcode by aiming and the illumination box is over the outer edges of the barcode, as shown on the picture below.
1 DATECS INFINEA TAB M USER MANUAL Magnetic cards reading The Infinea Tab M has a built-in magnetic card reader. The card reader incorporates a (3) track magnetic read head, requiring a single swipe to read field data from all three tracks. The magnetic reading head faces up, towards the top of the bottom cover of the cradle. When swiping the card into the reader, the magnetic stripe must be facing down, as shown in the figure below.
1 DATECS INFINEA TAB M USER MANUAL Contactless cards reading The Infinea Tab M has a contactless card reader. Contactless card reader is located on the bottom side. Contactless card must be placed there (showed on the picture below). UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL Smart cards reading The Infinea Tab M has a smart card reader. Smart card insertion direction is showed on the picture below. UM 07.01.06/v3.1.
1 DATECS INFINEA TAB M USER MANUAL CARE, MAINTENANCE AND WARRANTY • • • • • • UM 07.01.06/v3.1.0 Keep the Infinea Tab M side of the reach of small children. Keep the Infinea Tab M dry. Precipitation, humidity and liquid contain minerals that will corrode electronic circuits. Do not use or store in dusty or dirty areas. Do not drop or knock Infinea Tab M Do not open the Infinea Tab M. Only qualified personnel can open the device and make repair.
