DATECS LineaPro 11 Industrial User Manual
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL LEGAL NOTICE THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM DATECS LTD. Address: 4 Datecs Street, Sofia 1592, Bulgaria Phone: +359 2 816 55 50 Fax: +359 2 816 55 65 E-mail: export@datecs.bg v1.1.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL REVISION HISTORY Version v1.1.0 Data Change description 1.0.0 21.08.2020 First Release 1.1.0 18.05.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL CONTENTS REGULATORY ........................................................................................................................................................................... 5 TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6 GENERAL VIEW ...................................................................................
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL REGULATORY FCC ID: YRW-LINEAPRO11I This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL TECHNICAL SPECIFICATIONS Keyboard and Buttons Contactless Card Reader (optional) 2D Barcode Reader Supported 1D and 2D Symbology Connectivity Device Compatibility Audio Features Power Supply Battery Dimension W x H x D, mm Weight, g Operational temperature range Storage temperature range Compatible Accessories Two Scan buttons Supports: ISO/IEC 14443 Type-A/MIFARE - MIFARE MINI - MIFARE CLASSIC-1K, MIFARE CLASSIC-4K - MIFARE ULTRALIGHT, ULTRALIGHT-C - MIFA
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL Use only original equipped DATECS cable USB-A to USB-C (Z05C000000-05) or approved USB-C to USB-C cable for charging Apple device. Use only UL approved USB adapters. The minimum requirements of USB adapter are 5V/2.1A! Waste Electrical & Electronic Equipment The symbol means that according to local laws and regulations your product shall be disposed of separately from household waste at the end of its working life.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL GENERAL VIEW 1. Barcode engine 2. Back Cover 3. Right Scan button 4. Linea battery cover lock/unlock lever 5. Locking screw for back cover. 6. Battery cover/RFID reader for HF v1.1.0 7. External features connector 8. On/Off button of Apple device 9. USB type-C connector 10. Left Scan Button 11.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL GETTING STARTED LineaPro 11 Industrial has rechargeable Li-ion battery. Can be charge from USB port or External features connector. Power source can be variable from USB wall adapters, Datecs power stations. Before first use, battery must be fully charged. If the device is fully discharged, charging time to fully charged would be approx. 4 hours and 30min (for more details please refer to the table below).
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL ATTACHING APPLE DEVICE TO LINEAPRO 11 INDUSTRIAL First needs to be removed back cover. Then must be slide down Apple device to LineaPro 11 Industrial lightning connector. Slide Apple device until completely fit to LineaPro 11 Industrial. Place back cover to LineaPro 11 Industrial. Before removal back cover, locking screw of back cover must be unscrewing. v1.1.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL REPLACING BATTERY OF LINEAPRO 11 INDUSTRIAL The rechargeable battery of Linea can be replaced. Put the lever (1) to unlock position, then pull up the battery cover (2). Remove old battery with pulling up (3). Insert first the side with contacting pads of the battery then press it down. Direction of battery cover closing. Place the clips to correct position. When the battery cover is completely closed, slide the lever to lock position.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL OPERATION MODES For start operating with LineaPro 11 Industrial is need to be attached Apple device and installed application for iOS. For downloading the latest SDK please contact with your distributor. For turn On LineaPro 11 Industrial press one of the scan buttons and unlock Apple device screen. Scanning barcodes LineaPro 11 Industrial can scan 1D and 2D barcodes. To scan barcode first, activate the scanner (by pressing and holding the scan button).
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL Contactless cards reading. The LineaPro 11 Industrial has RFID HF contactless card reader. The reader is located on LineaPro11 Industrial back side. Contactless card/tag must be placed on showed position (1). For list of supported standards, please refer to sections “TECHNICAL SPECIFICATIONS”. v1.1.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL Turn off device function When is pressed this turn off, LineaPro 11 Industrial is going to sleep mode immediately. Charging Apple device LineaPro 11 Industrial can charge Apple device, when power source (USB adapter) is attached to USB connector or LineaPro 11 Industrial is placed on Datecs charging station. Charging Apple device can be at LOW and HIGH power and depends on the battery charging state and power source.
1 DATECS LINEAPRO 11 INDUSTRIAL USER MANUAL CARE, MAINTENANCE AND WARRANTY • • • • • • • • v1.1.0 Keep the LineaPro 11 Industrial side of the reach of small children. Do not drop or knock LineaPro 11 Industrial Don’t charge LineaPro 11 Industrial when inside of USB connector is spilled liquid. Please first clean and dry the USB connector and then charge the device. Keep the device and battery away from excessive heat and direct sunlight.
