DATECS User Manual Linea Pro 5
1 DATECS Linea Pro 5 ` User manual CONTENTS Legal Notice ............................................................................................................................................. 3 Compatibility ............................................................................................................................................ 3 Linea Pro 5 Models ..................................................................................................................................
1 DATECS Linea Pro 5 ` User manual Legal Notice “Made for iPod” and “Made for iPhone” mean that an electronic accesory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible fort he operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accesory with iPod or iPhone or may affect wireless performance.
1 DATECS Linea Pro 5 ` FCC Notice User manual This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1 DATECS Linea Pro 5 ` User manual Linea Pro 5 Models Model Linea Pro 5 MSR Linea Pro 5 EMSR Linea Pro 5 MSR 1D/2D Linea Pro 5 EMSR 1/D2D Linea Pro 5 MSR 1D/2D/BT Linea Pro 5 EMSR 1D/2D/BT Linea Pro 5 MSR 1D/2D/ BT/RFID Linea Pro 5 EMSR 1D/2D/ BT/RFID Description Linea Pro 5 with 3-Track mag-stripe reader Linea Pro 5 with Secure Encrypting MSR Module Linea Pro 5 with 3-Track mag-stripe reader and 1D/2D barcode scanner Linea Pro 5 with with Secure Encrypting MSR Module and 2D barcode reader Linea Pro 5 wi
1 DATECS Linea Pro 5 ` User manual Overview Linea Pro 5 allows mobile workers to convert their iPhone 5 / iPod 5 handset into a powerful point-of-sale solution. The Linea Pro 5 includes optional 1D or 2D barcode scanner, 3-tracks magnetic stripe reader, RFID reader and a rechargeable battery extender in a very compact and durable protective case. Features: Battery: Rechargeable Li-ion Battery - 1300 mAh, charging via USB or DATECS Power Station.
1 DATECS Linea Pro 5 ` User manual Technical Data Processor 32-bit ARMTM CortexTM - M3 based Microcontroller Magnetic Card Reader (option) • 3-track bi-directional reading • ISO 7810, 7811 and 7813 Secure Magnetic Card Reader (option) • PCI PTS 3.
1 DATECS Linea Pro 5 ` User manual Box Contents Your Linea Pro 5 comes with the following items listed below: Item Part Number Descriptions 1 Linea Pro 5 Linea Pro 5 / Scanner 2 USB A to mini USB B USB Sync cable 3 Linea Pro 5 User Manual User's manual *Bulk Shipments may ship without cables and manuals in each box.
1 DATECS Linea Pro 5 ` User manual Getting Started The Linea Pro 5 allows you to scan barcode and capture Magnetic Strip information onto your iPod 5 or iPhone 5. Before using your Linea Pro 5 the battery should be properly charged. The following Quick Start guide will help to get your Linea Pro 5 ready for use. Quick Start: Step What to do Purpose Where to find more information 1 Fully charge your Linea Pro 5 as recommended.
1 DATECS Linea Pro 5 ` User manual Buttons overview Front side view Back Cover Volume Controls 10
1 DATECS Linea Pro 5 ` User manual 10-pin mini USB connector Openings for Speaker and Bottom microphone Status LEDs and Status Button Aperture for Headset Jack Charging Lamellas Back side view Magnetic stripe reader Scan Button Scan engine On/Off Linea Pro 5 versions for iPod5 and iPhone5 11
1 DATECS Linea Pro 5 ` User manual Linea Pro 5 for iPhone 5 (Aperture for Ring/Silent switch) Linea Pro 5 for iPod 5 Attaching device Step 1 – Remove the “back cover” 12
1 DATECS Linea Pro 5 ` User manual Step 2 – Slide the iPod 5 or iPhone 5 into Linea Pro 5. (Please, before attaching the device, check the compatibility version of the Linea Pro 5 - for iPod 5 or iPhone 5 (page 10), and then connect it with the correct Linea Pro 5). Slide in until iPod 5 or iPhone 5 is connected to the lightning 9-pin connector.
1 DATECS Linea Pro 5 ` User manual Operation modes Active mode - While iPod 5 or iPhone 5 is inserted. While the Linea Pro 5 application is active. Sleep mode - While iPod 5 or iPhone 5 is removed (after ~10sec). When iPod 5 or iPhone 5 On/Off button is pressed (after ~10sec). When iPod 5 or iPhone 5 “Auto-Lock” function is activated (after ~10sec).
1 DATECS Linea Pro 5 ` User manual Charging Battery The Linea Pro 5 uses a 1300mAh Lithium-Ion rechargeable battery pack. Before first use, the battery pack should be charged for at least (4) hours. Linea Pro 5 can be charged via USB port or DATECS Power Station. When the Linea Pro 5 charging is started, automatically starts the charging of the inserted inside the cradle iPod 5 or iPhone 5.
1 DATECS Linea Pro 5 ` User manual Battery status level of the Linea Pro 5 LED1 is lighting – battery level is under or equal to 3,6V. LED1 and LED2 are lighting – battery level is between 3,6V and 3,7V. LED1, LED2 and LED3 are lighting – battery level is between 3,7V and 3,9V. LED1, LED2, LED3 and LED4 are lighting – battery level is between 3,9V and 4,2V. While the device is charged, depending on the battery level, one of the LEDs is blinking.
1 DATECS Linea Pro 5 ` User manual Barcode Scanning Using the 1D barcode scanner: The Linea Pro 5 1D uses a scan engine that supports one-dimensional (1D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size. Scanning 1D Barcodes: To scan a 1D barcode, first activate the scanner. Then position the scanning head as close as possible to the barcode label so that the scan line crosses both ends of the barcode as shown on the figure below.
1 DATECS Linea Pro 5 ` User manual Using the 2D barcode scanner: The Linea Pro 5 2D uses a scan engines that supports one-dimensional (1D) and two-dimensional (2D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size. Scanning 2D Barcodes: To scan a 2D barcode fist activate the scanner.
1 DATECS Linea Pro 5 ` User manual Magnetic Card Reading Reading Magnetic Stripes: The Linea Pro 5 has a built-in magnetic card reader. The card reader incorporates a (3) track magnetic read head, requiring a single swipe to read field data from all three tracks. The magnetic reading head faces up, towards the top of the bottom cover of the cradle. When swiping the card into the reader, the magnetic stripe must be facing down, as shown in the figure below.
1 DATECS Linea Pro 5 ` User manual Contactless Card Reading In order to use the RFID card reading function, special software must be used. Please contact your distributor in order to get the latest demo application and SDK. Place the card on the shown spot and press the reading RFID card button on the application. The data will be sent from the LineaPro 5 RFID reader to the Apple Device.