User's Manual

1 DATECS LINEAPRO 7 UHF USER MANUAL
UM 07.01.18/v1.1.0 14
OPERATION MODES
For start operating with LineaPro 7 UHF is need to be attached Apple device and installed application
for iOS. For downloading the latest SDK please contact with your distributor.
For turn On LineaPro 7 UHF press one of the scan buttons and unlock Apple device screen.
Scanning barcodes
LineaPro 7 UHF can scan 1D and 2D barcodes. To scan barcode first, activate the scanner (by pressing
and holding the scan button). Then position the scanning engine to the center of the barcode by aiming
and the illumination box is over the outer edges of the barcode, as shown on the picture below. Slowly
pull back or forward the unit, while increasing or decrease the distance between the barcode and the
scanning head, until the barcode has been read by the scanner. Barcode data will have shown on the
use application for iOS.
LineaPro 7 UHF support different types of scanning modes:
- Single Scan
- Multi Scan
- Motion Detect
- Multi Scan without duplicates