User`s manual

User’s Manual

When paper rolls are used sets the vertical size of the

printing area and the automatic space added after it.

Both sizes are in dots: 8 dots/mm or 203 dots/inch. If

there are elements outside of this size when the image

is generated they will be cut off.

Example: Q240,80

Sets the length of the page - 30 mm - and dividing

space 10 mm. When sticker-labels are used sets the

borders of the label, and prints exactly one image per

label. In spite of this the parameters must be within the

set limits as quoted above.

Setting the starting point of the print

Sets the starting point of the printing area.

Format: Rm,n

m is the horizontal offset. Possible value is 0 - 383.

n is the vertical offset. Possible value is between 0 and

3999.

Example: R24,24

Sets an initial offset on X and Y of 3 mm.

Setting the print direction

Sets the position of the image during print.

Format: ZT or ZB

ZT Normal image

ZB Image rotated to 180

Set date and hour

The command is used to set the real-time clock of the printer.

Format: TSm,d,y,h,m,s

m month (1 - 12)

d day (1 - 31, validity of the date being checked)

y year - the last two digits (0 - 99).

h hour (0 - 23)

m minutes (0 - 59)

s seconds (0 - 59)

Example: TS04,2,04,14,10,10

Sets clock to 2 April 2004, 14:10:10