User's Manual

1 DATECS SUMUP AIR LITE V2 USER MANUAL
13
Bluetooth Pairing
Turn on SumUp Air Lite v2, connect it to PC via USB cable. When device is connected to PC, will create
virtual COM port. Check on device manager on which port is connected. After that run the special
application for PC (Fig. 3). Press “Search” button on the app, and in right side will be show all available
COM ports. Select on which is connected device, then press “Connect to device”. From Bluetooth
management on mobile device (equipped with BLE 4.2) select connect to SumUp Air Lite v2, then on
mobile device screen will be show PASSKEY (Fig. 6). All LEDs will start to light one by one continually,
on special app will be show Passkey (Fig. 4), if they are same press “Power button” on SumUp Air Lite
v2 to confirm (Fig. 5), then special app return message “THE DEVICES ARE CONNECTED” (Fig.7 when
on both device is confirming pairing). If Passkey is being different don’t press the button, wait 60
seconds for timeout of the pairing.
Fig. 3
Fig. 4
Fig. 5
Fig. 6