User's Manual

Important Information
Please ensure that you read the following information before continuing:
Power Racer 270 Front Overview
The following section shows a front overview of the Power Racer 270 with the location of the
buttons and indicator lights.
A. X Button
B. Y Button
C. B Button
D. A Button
E. Player Number Indicator Lights
F. Accelerator Pedal Pressure Indicator
G. Brake Pedal Pressure Indicator
H. L1 Button
I. L2 Button
J. L3 Button
K. R1 Button
L. R2 Button
M. R3 Button
N. Guide Button
O. Start Button
P. Profile Switch
Q. Back Button
R. Battery Indicator Light
S1. Directional 1
S2. Directional 2
S3. Directional 3
S4. Directional 4
T. Paddle 1
U. Paddle 2
V. Stick Shift Up
W. Stick Shift Down
X. Stick Shift Right
Pre-Set Profiles
The actual controls which are assigned to each button are dependent on the selected pre-set
profile, for advice on the configuration of the pre-set profiles please refer to the section ‘Pre-
Set Profiles’.
Customizer PC Software
For advice on creating your own customized profiles, please refer to the section ‘Power Racer
270 Customizer’.
Caution When Turning The Wheel:
Do not apply excessive force to turn the wheel beyond the limits of its rotation as this may
result in damage to the Power Racer 270.
Battery Precautions:
• ”Caution” – The battery used in this wheel may present a risk of fire or chemical burn if
mistreated.
• Do not attempt to open the product or replace the battery. It is built-in and not
changeable. Use of other batteries may present a risk of fire or explosion and the warranty
will be terminated.
• Only recharge your battery with the provided cable designated for this product.
• Dispose of batteries according to local regulations. Please recycle when possible. Do not
dispose as household waste or in a fire as they may explode.
• Batteries may explode if damaged.
Built-In Battery Care:
• The wheel is powered by a rechargeable battery.
• The full performance of a new battery is achieved only after two or three complete charge
and discharge cycles.
• The battery can be charged and discharged hundreds of times, but will eventually wear
out.
• If left unused, a fully charged battery will lose its charge over time.
• Leaving the product in hot or cold places will reduce the capacity and lifetime of the
battery.
• Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A product with a
hot or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Safety Information:
• Never try to dismantle the product yourself, or push objects of any kind into the products,
as this may cause short circuits which could result in a fire or electric shock.
• None of the components can be replaced or repaired by users.
• Avoid exposing your product to rain, moisture or other liquids to protect against damage
to the product or injury to you.
• Keep all products, cords, and cables away from operating machinery.
• Dispose of the product according to local standards and regulations.