User's Manual

Charging the Headset
The Game Talk Pro-2 Wireless comes with a built-in Lithium Polymer battery that needs to be
charged before first use. To do this, please follow these steps:
Step 1:
Connect the USB charging cable (supplied) into any free USB port on your PS3.
Step 2:
Connect the mini USB end of the charging cable to the Charging Jack, located on the Game Talk
Pro-2 Wireless.
Step 3:
Whilst charging, the Status Indictor Lights will repeatedly fill up in sequence.
Step 4:
When charging is complete all four Status Indicator Lights will remain static. Disconnect the
USB charging cable from your PS3 and the Charging Jack on the Game Talk Pro-2 Wireless.
Charging Time
Fully charging the built-in battery can take up to four hours. While charging, the headset will
not function and it’s perfectly normal for the headset to become slightly warm.
When to Recharge
When the battery begins to run low the headset will emit 2 audible beeps, these beeps will
repeat until the unit is plugged into the PS3 console to recharge – or when battery life totally
expires and power is lost. In order hear the 2 audible beeps you will need to ensure that the
Game Chat Volume control is set to a reasonable level.
Important Charging Precautions
For Safety reasons, and to prevent damage to the headset, please ensure that you follow these
recommendations:
 Please recharge the headset at normal room temperature, do not recharge the headset in
temperatures in excess of 30oC.
 Only use the USB charging cable supplied to charge the headset.
Connecting the Audio Transmitter to the PS3
The following steps explain how to connect the Audio Transmitter to the PS3 using the
standard A/V cable or a HDMI cable.
Step 1:
Ensure that the console is powered off and disconnect the inserted PS3 A/V cable.
Step 2:
Connect the Audio Transmitter to the A/V MULTI OUT connection on the PS3.
Step 3:
Connect the A/V cable to the rear of the Audio Transmitter or connect the HDMI cable to the
HDMI connection on the PS3.