Operation Manual

8
Dateq Ace Manual Installation
EN
Combined microphone/ line channel (1...4)
These channels can be used to connect a microphone or a line source. The channel is equipped
with gain-control and input-selector. Each microphone channel has a separate phantom-power
supply, a TalkOver circuit and an internal dual equaliser. The microphone inputs have a gain-
trimmer at the connectorboard. Each line-channel has the possibility to adjust the input sensitivity
by means of an internal resistor.
-12 -12
-20 -20 -20
+6 +6
+3 +3
00
-6 -6
zz
GAIN GAIN
12
Signal Si
g
nal
Line Line Line
Mic Mic Mic
GAIN Volume preset for both the microphone and the stereo-line input.
MIC/ LINE Input selector.
SIGNAL This LED will light up when a signal is applied to the channel.
The threshold is -30dB for the line input.
Stereo Line inputs (5 and 6)
These channels can be used to connect stereo-line sources. Each channel has a input-selector
and volume-control. Each line-channel has the possibility to adjust the input sensitivity by means of
an internal resistor.
-12 -12
-20 -20
+6 +6
+3 +3 +3
000
6
-6 -6
zz
GAIN GAIN GAIN
LOW
0
-1
2
3
4
55
4
3
2
1+
R
L
-15
456
Signal Signal Signal
Line 1 Line 1
Line 2 Line 2
GAIN Volume preset for both line inputs.
LINE 1/ LINE 2 Input selector.
SIGNAL This LED will light up when a signal is applied to the channel.
The threshold is -30dB.