Specifications

Aestiva
7-14 1006-0939-000
7-14
1. O
2
sensor (ventilator) Or plug
2. Inspiratory port
3. Tabs (identify the breathing circuit module to ventilator)
4. Expiratory port
5. To-Fro port
6. Fresh gas port
7. Flow sensor module connector (used with ventilator)
8. Optical switches (use tabs to identify circuit module)
9. Internal connection (exhaled gas flows to absorber during expiration)
10. Internal connection (to Bag/Vent switch)
11. Auxiliary Common Gas Outlet (some models)
12. Selector switch (Auxiliary Common Gas Outlet)
13. Common Gas Outlet
14. Internal connection (mixed gas from absorber during inspiration)
15. Internal connection (Aux. Com. Gas Outlet to O
2
sensor)
16. Pressure gauge tap
17. Drain valve (push in to drain water into the drain dish at bottom of absorber)
Note: Items 11 and 13 are both called fresh gas outlets.
Figure 7-8 • Breathing circuit modules and connections
1
Circle Module Mapleson D / Bain
7
8
9
10
11
12
13
14
15
16
234536
17
AB.23.210
AB.23.056