Specifications

Aestiva
I-4 1006-0939-000
Pres Control Not Avail. 5-13
Pres/Vol Mon Inactive 5-13
Pressure control mode 7-4
settings 7-4
Pressure measurement
source 7-2
PSVPro mode 7-5
settings 7-6
R
Repair policy 4-2
Replace O2 Sensor 5-13
S
Scavenging connection 3-9
Scavenging path 2-13
Scavenging receiver
disassembly/maintenance 4-8
Scavenging reservoir
disassembly 2-13
scavenging reservoir 2-13
Schedule Cal Due 5-13
Schematic
internal signals 7-8
patient circuit 7-7
pneumatic 7-9
Select Gas Outlet 5-13
Serial port 3-10
Setup 3-2
setup 3-2
SIMV mode 7-4
settings 7-4
Software Watchdog Failure 5-14
special requirements 2-7
Sterilization 2-7
autoclave 2-6
Stock numbers
assorted tools 6-10
Suction regulator 3-10
specifications 7-12
Sustained airway pressure 5-14
Sustained Paw 5-14
System Leak? 5-14
T
Tec 6 power connector 3-8
Test tools
stock numbers 6-10
Top shelf 3-15
weight limit 3-15
Troubleshooting
alarms alphabetical list 5-4
electrical problems 5-17
high-pressure leaks 5-19
low-pressure leak 5-19
U
Unable to Drive Bellows 5-6
V
Vaux_ref Out-of-Range 5-14
VE auto limits 3-18
Ventilator
accuracy 7-25
modes 7-3
operating specifications 7-23
theory of operation 7-2
Ventilator drive gas 3-18
Verify Low VE Limit 5-4
Vext_ref Out-of-Range 5-14
Volume Apnea 5-14
Volume Apnea > 2 min 5-4, 5-14
Volume control mode 7-3
settings 7-3
Volume measurement
source 7-2
Volume monitoring 7-2
VT compensation off 7-6
Vt Compensation Off 5-15
VT Not Achieved 5-15
Vte > Insp Vt 5-15