User guide

2 Bay 3.5” HDD SATA NAS
14
z Windows and FTP Access
“Allow for all” is to allow all users to access the shared storage in the server; or you
may specify User/Group name in Access box and select “Read Only” or Writable
permission to the User/Group.
z NFS Access
You could check “Allow for all” to allow all clients access NFS server. Or add client
PCs IP address/Subnet mask to the permission list to allow only permission list to access
the NFS server.
z Delete Share
“Delete Share” deletes a specified share name.
2.3.3 System Setting
Seven sections were included in the chapter “System Setting”, there are “Network
Setting”, “Wireless Settings”, “Time Setting”, ”Turn Off Server”, ”Information”, “Disk
Usage” and “Error Notification.
Network Setting
z Hostname:
You must assign a unique name for each 2 Bay NAS as the identification within
your local area network.
z IP address setting:
1. Obtain IP address automatically
The system will obtain the IP address automatically via DHCP protocol if the local
network has DHCP server available. The default IP address is 192.168.1.1 if it failed to
get an IP address from DHCP server.