User guide

2 Bay 3.5” HDD SATA NAS

6. Please select to execute and setting the download item. Setting finish press

“Run Torrent”.

Note:

Please make sure your RAID mode was ready, because when you rebuild RAID,

system will restore to default, and your will lost.

2.3.5 Maintenance

Five sections were included. They were “Disk Utility”, “Firmware Upgrade”, “Save

Configuration”, “Restore Configuration”, and “Factory Reset”.

Disk Utility

Disk utility shows device name, type of file system, total disk size, used disk size, volume

mounted and disk mount status of all disks.

For new attached hard disk, you should format the disk before any setting. To avoid

pressing the button by mistake, the system will require your confirmation before start

executing “Format” or “Scandisk” function.

z Format Button, to format the specified disk with three different file systems, (“EXT2”,

“EXT3” and “FAT32”)

z Scan Button, to check the disk integrity,

z Disk spin down time, specify your disk spin down time without access hard Disk,

z Umount Button, to deactivate the disk partition.

Encrypt function

2 Bay NAS

supported EXT2 file system with 128 bits loop-AES encryption. And it