User guide

2 Bay 3.5” HDD SATA NAS

supported a full disk data encryption. To turn on this function, you should input 20

characters password and format disk again.

For USB disk

It will be mounted to /mnt/USB1 automatically if the USB disk was plugged in. To

remove the USB disk from

2 Bay NAS

, please make sure that no user is accessing the disk

and then click the Umount icon.

The share folder name will be display as “usb1” while browse through samba protocol.

RAID Setting

2 Bay NAS

supported RAID0 and RAID1. If you put only one HDD, so the screen will show “Can’t

setting RAID”, if you put two HDD, the screen will show “RAID0” and “RAID1” two item.