Owner manual
BIOS CONFIGURATION
75
To delete a pass-through drive from the pass-through drive pool,
move the cursor bar to the “Delete Pass-Through Drive” item,
then press the Enter key. The “Delete Pass-Through conrma-
tion” screen will appear; select Yes to delete it.
3.7.4.5 Identify Selected Drive
To prevent removing the wrong drive, the selected disk fault LED
Indicator will light for physically locating the selected disk when
the “Identify Selected Device” is selected.
3.7.4.6 Identify Enclosure
To prevent removing the wrong enclosure, the selected Areca
expander enclosure all disks fault LED Indicator will light for
physically locating the selected enclosure when the “Identify
Enclosure” is selected. This function will also light the enclosure
LED indicator, if it is existed.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Conguration
View System Events
Clear Event Buffer
Hardware Monitor
System information
Physical Drive Information
Physical Drive function
View Drive Information
Create Pass-Through Disk
Modify Pass-Through Disk
Delete Pass-Through Disk
Identify Enclosure
Identify Selected Drive
Select The Drives
E#1Solt#2 : 500.1GB : HDS725050KLA360
E#1Solt#3 : 500.1GB : ST3500630NS
E#1Solt#4 : 400.1GB : Hitachi HDT725040VLA360
E#1Solt#5 : 400.1GB : Hitachi HDT725040VLA360
E#1Solt#6 : 400.1GB : Hitachi HDT725040VLA360
E#1Solt#7 : 500.1GB : HDS725050KL360
E#1Solt#8 : 500.1GB : ST3500630NS
E#1Solt#2 : 500.1GB : HDS725050KLA360