User guide

RM4_eSU3 RAID Manager User Guide Rev. 0.90 20 09/03/19
Page 7
2. Getting Started
The following sections will lead you go through all basic pages and advanced pages. Let us start with
the “RAID and Disk Information” page.
2.1 Basic Mode
The basic mode is aimed to provide users to navigate the disk and RAID information, the event log as
well as do the basic configuration to the connected disks.
2.1.1 RAID and Disk Information
This page consists of two parts. The left part is a tree which shows all controllers on this platform and
their connected RAID and disks in a hierarchy view. When the user selects a tree item, the detail
information of the selected item will be displayed in the right part. All the disk and RAID information
will be updated in real–time and users could monitor the status easily.
2.1.1.1 Controller Information
If the user selects a controller item from the tree view, it will display the model name and capacity of the
RAID and disks connected on the specified controller at the right top table and also display all
connected disk charts at the right bottom area. For RAID member disks, the disk charts will be drawn
with the different colors according to the different RAID.