User Manual

Check RAID Subsystems on LCD:
1. Press up or down arrow key to select “System Manager”.
2. Press “ENT” to enter “System Manager”.
3. Press up or down arrow key to select “Hardware Monitor”.
4. Press “ENT” to enter “Hardware Monitor”.
5. Press “ENT” to see 3.3V voltage.
6. Press down arrow key to see 5V voltage.
7. Press down arrow key to see 12V voltage.
8. Press “ESC” key and down arrow key to select “Temp.
Monitor”
9. Press “ENT” key to see temperature of thermal sensor.
10. Press “ESC” key and down arrow key to select “Fan
Monitor”.
11. Press “ENT” key to see fan speed.