User guide

uNAS/tNASUserGuideVersion1.0 Page21

Function: IP address
Here you can set TCP/IP parameters for selected NIC.
Activate - You can activate or deactivate network interface by setting this checkbox. DHCP /
Static. You can use static or dynamic (DHCP) network interface configuration.
Get DNS - If you want to dynamically get DNS address, select "get DNS". When using static
configuration of network interface, enter:
• address IP,
• netmask,
• broadcast,
• gateway.
If you set new IP address, during activation, you will lose your connection to the server and
you will have to log in again. In the URL entry line of your browser, please enter the new IP
address. If you do not get access, please try the console to set new IP address. In order to
access servers in another subnet, you need to enter the address of a router as Gateway.
In case you use NTP server to maintain proper time & date, please make sure you have
proper Gateway and DNS settings.
In case of creating bonding interface on left page will appear new branch “bond0”. By clicking
on the branch “bond0” you have the possibility of bonding’s settings and removal (see below).