User guide

uNAS/tNASUserGuideVersion1.0 Page35

Timeout - Battery Limit
This option enables sub staining the system as long as battery holds(the system will shutdown
when battery charge drops to 5% or when there are 3 minutes time to total discharge of
battery)
Turn off UPS after system shutdown
This will turn off the UPS after time that is set by parameter Shutdown grace delay(SLEEP) in
EEPROM of UPS.
Function: Time zone settings
This function allows to set NTP server settings.
Please choose a NTP server (Network Time Protocol: for more info:
www.ntp.org)
You may provide a fully qualified host name or IP address. Select time zone accordingly to
your location.
There is also option Continuous adjusting using NTP, this will watch your system time and will
correct it, if the difference between local time and server time has change. Setting this option
on is specially recommended when using domains.
Time setting is very important for proper work of the server.
You must have set gateway and (in case of host name) DNS network settings.