User guide

uNAS/tNASUserGuideVersion1.0 Page36

Function: Set time
With this function you can set time and date:
Manual
Just type in time & date using following format: hh:mm:ss yyyy-mm-dd.
Use this PC time
It will pick up the time & date of the PC you run the web browser.
NTP server
It will pick up the time & date from NTP server. In this case please make sure you have
Internet access and proper network setup, specially gateway and DNS. You can check proper
Internet access using ping from the NAS console (press F1 on console to find out keyboard
shortcuts). To use this option you must set correct NTP server in function Clock settings.
Time setting is very important for proper work of the server.
Function: Power button settings
In this section you specify which action will be performed in case of power button is pressed
Options:
Reboot
Restart computer.