User guide

uNAS/tNASUserGuideVersion1.0 Page42



LDAP administrator DN you should set previously entered base DN with prefix like "cn=admin,"

(CN - Common Name). Users should be stored in Organization Unit (ou) "People", groups in

"Groups", and computers in "Computers". Sample organization can look like showed below:

Windows (PDC)

In this case NAS server will use Windows Primary Domain Controller user database for user

authentication. This method can be used for NT4/2000/2003 servers. In case Windows

2000/2003 server run ADS native mode, please use Widows (ADS) method.

In case of PDC server running under NT4, please use following procedure if you experience

problem to get connection:

1. Run Server Manager program from Menu Start  Programs  Administrative Tools

(Common)

 Server Manager.

2. From Server Manager menu select Computer  Add to Domain WARNING: If NAS

resource is already added, you must remove it.

3. In Computer Name field enter NAS Server-Name (NetBIOS name).

4. Click Add button Set Windows (PDC) in NAS.

5. Next, in NAS server web administration: choose “CONFIGURATION”  “NAS-Settings”.

6. Choose Windows (PDC) as Authentication method.

7. In Server IP field enter NT server IP address.

8. In Name & Password fields enter NT4 administrator account name and password

9. Click apply button. WARNING: If connection fails, the next try you must restart from point

Windows (ADS)

This option can be used for Windows 2000/2003 ADS servers:

• Please enter Realm name of your Windows 2000/2003 server.

• It can be found under Windows system by clicking right mouse button on My Computer and

selecting Properties, then clicking tab Computer name, Realm name is the Domain name.