User's Manual

HH7700-MSOP 3-3
3: Radio Operation
Receiving a Call
1. Turn the radio on.
2. Adjust the volume.
3. Select the desired channel.
4. Listen for voice activity. The LED indicator flashes green while
the radio is receiving.
5. To respond, hold the radio 1 to 2 inches from your mouth. Press
PTT to talk. The LED turns red.
Note: The radio can be programmed to enable a timeout from 0.5
seconds to 4 minutes. The call may terminate if the call time is exceeded.
Sending a Call
1. Turn on the radio.
2. Select the desired channel.
3. Press
PTT to talk. Pause a second before speaking to avoid voice
cutoff.
Note: The MONITOR button can be pressed for tracking frequency usage.
However, if
LOCKOUT TYPE is programmed to monitor busy channels or
tones, pressing
MONITOR is not necessary.
Monitoring the Radio
Press MONITOR to listen for activity on the channel/frequency. The
monitor function works in standby or receiving mode. When the feature
is on, the LED is green and the monitor icon is displayed.
Press
MONITOR again to disable the function.