User's Manual

3-12 HH7700-MSOP
3: Radio Operation
Programmed Settings
The following settings are programmed using the Programmer. For
details, refer to the HH7700-PROG-MSOP Programmer guide.
Common Parameters
.
Feature Available Settings Default
Power on beep Enable: Radio beeps when turned on.
Disable: Radio does not beep when
turned on.
Enable
Key button beep Enable: Radio beeps when a key is
pressed.
Disable: Radio does not beep when a
key is pressed.
Enable
Rotary beep Enable: Radio beeps when the channel
select knob is turned.
Disable: Radio does not beep when
turning channel select knob.
Enable
Low battery
beep
Enable: Radio beeps when battery is
low.
Disable: Radio does not beep when
batter is low.
Enable
Battery save on
timer
Disable: No powersave feature.
To enable, set from 200 ms to 1000 ms
in increments of 50 ms.
Disable
Battery save off
timer
100 ms to 500 ms in increments of
50 ms.
250 ms
Timeout timer 0.5 minutes to 4 minutes in increments
of 0.5 minutes.
3 min
TX/Busy lamp Enable: On transmission, radio lamp is
lit.
Disable: Lamp does not light up during
transmission.
Enable
LCD/keypad
lamp
Disable: LCD/buttons don’t light up.
On after key: Light turns on after any
button is pressed.
Always on: Light is always on.
On after
key
Frequency
display
Enable: Frequency is displayed instead
of channel number.
Disable: Channel number is displayed.
Disable