Specifications

Operation 3-23
6. Press CALL again. The TW7000 is now under full control of
the Transcall circuit.
The TW7000 starts transmission on each of the ten channels
until it is synchronized with the station being called. When syn-
chronized, both transceivers step through each channel by mak-
ing a short transmission until the best available channel is
reached. Once the best channel is reached, the TW7000 sounds
an alarm indicating a successful Transcall connection.
Display: TC LINK
If the call is unsuccessful, calling is discontinued and NO LINK
displays briefly.
7. To break the connection, press SCAN.
8. To stop the call before connecting, press CALL.
Note: When scanning in Transcall, the receiving station also responds
to a valid Selcall.
TransAdapt: The TW7000 can be on a fixed channel or in scan
mode. If on a fixed channel, TransAdapt operates the same as Selcall.
If in scan mode, TransAdapt locates the first usable frequency, not the
best.
1. Press OPTION until the TA icon flashes.
2. Press STATUS to turn the option ON.
3. Press SCAN.
4. Press CALL to initiate the call.
5. Enter the code of the transceiver to call (001-255). A call to all
channels (Allcall) is code 000.
6. Press CALL again. The TW7000 is now under full control of
the TransAdapt circuit.
The TW7000 starts transmission on each of the ten channels
until it is synchronized with the station being called.
Display: TA LINK
If the call is unsuccessful, calling is discontinued and NO LINK
displays briefly.
7. To break the connection, press SCAN.
8. To stop the call before connecting, press CALL.