Manualshelf

User's Manual

ManualsBrandsDatto ManualsElectronicsWireless a/b/g/n/AC Access Point
11121314151617181920
14
2.4
Hardware Installation
1.
Ensure that the computer in use has an Ethernet Controller (RJ-45 Ethernet Port). For more information, verify with your
computer’s user manual.
2.
Connect one end of the Category 5e Ethernet cable into the RJ-45 port of the MR1750 and the other end to the RJ-45
port of the computer. Ensure that the cable is securely connected to both the MR1750 and the computer.
3.
Connect the Power Adapter DC connector to the DC-IN port of the MR1750 and the Power Adapter to an available
electrical outlet. Once both connections are secure, verify the following:
a)
Ensure that the
POWER
light is on (it will be orange).
b)
Ensure that the
2.4GHz/5GHz WLAN
light is on (it will be green for 5G, blue for 2.4G).
c)
Ensure that the
LAN (Computer/MR1750 Connection)
light is on (it will be blue).
d)
Once all three lights are on, proceed to set up the access point using the computer.
This diagram depicts the hardware configuration.