User's Manual

4.3 WDS Bridge Mode

In WDS Bridge Mode, the MR1750 can wirelessly connect different LANs by configuring the MAC address and security

settings of each MR1750 device. Use this mode when two wired LANs located a small distance apart want to communicate

with each other. The best solution is to use the MR1750 to wirelessly connect two wired LANs, as shown in the following

figure.

WDS Bridge Mode can establish four WDS links, creating a star-like network.

Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency channel. More Access

Points connected together may lower throughput. This configuration can be susceptible to generate endless network loops in your network,

so it is recommended to enable the Spanning Tree function to prevent this from happening.