User's Manual

7.7 WDS Link Settings

Using WDS (Wireless Distribution System) will allow a network administrator or installer to connect to Access Points

wirelessly. Doing so will extend the wired infrastructure to locations where cabling is not possible or inefficient to

implement.

Note: Compatibility between different brands and models of access points is not guaranteed. It is recommended that the

WDS network be created using the same models for maximum compatibility.

Also note: All Access Points in the WDS network needs to use the same Channel and Security settings.

To create a WDS network, please enter the MAC addresses of the Access Points that you want included in the WDS. There can

be a maximum of four access points.

Note: Only applicable in WDS AP and WDS Bridge mode.