User's Manual

Management VLAN (Only

applicable

in Access Point mode)

Profile Isolation

Restricted

lient to communicate with different VID by

electing the radio button.

VLAN ID

Spec

ify the VL

AN tag for

each

profile.

Management VLAN ID

If your network includes VLANs, you can specify a VLAN ID for packets

pass through t

he Access

Point with a tag. Otherwise, select No VLAN tag.

Accept / Cancel

Click

to confirm the changes or

Cancel

to ca

ncel and return previous settings.

Note:

1. If you reconfigure the Management VLAN ID, you may lose your connection to the MR900V2. Verify that the DHCP server supports the

reconfigured VLAN ID and then reconnect to the MR900V2 using the new IP address.

2. Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 5.1).