User's Manual

Chapter 2 Hardware Overview
The following figures show the key components on the OM2P.
2.1 Bottom View
The bottom panel of the OM2P contains two RJ-45 ports, a PoE interface, and a Reset button. A
removable cover covers these components.
- The RJ-45 port connects to an Ethernet adapter in a computer you use to configure the OM2P. For
more information, see Chapter 4.
- The PoE interface allows the OM2P to be powered using the supplied PoE injector.
- The Reset button can be used to reboot the OM2P and return the device to its default factory
configuration, erasing any overrides you may have made to the device’s default settings. The
Reset button is recessed to prevent accidental resets. To reboot the OM2P, use a flat object such
as a pencil to press the Reset button for approximately 10 seconds and then stop pressing the
Reset button.
2.2 Back Panel
The back panel of the OM2P contains the LED indicators that show the link quality and status of the
OM2P.