User's Manual

3.2 Understanding the OM2P LEDs
The rear of the OM2P has two groups of LEDs. One group, labeled INDICATORS, shows the status of
the device. The second group, LINK QUALITY, shows the strength of the link between the OM2P and
the network. The following table describes the OM2P LEDs.
LED Color Mode Status
Power Green OFF= OM2P is not receiving power.
ON= OM2P is receiving power.
LAN Green OFF = OM2P is not connected to the network.
ON = OM2P is connected to the network, but not sending or
receiving data.
Blink = OM2P is sending or receiving data.
WLAN Green Access Point
or Client
Bridge Mode
OFF = OM2P radio is off and the device is not sending
or receiving data over the wireless LAN.
ON = OM2P radio is on, and the device is not sending
or receiving data over the wireless LAN.
Blink = OM2P radio is on, and the device is sending
or receiving data over the wireless LAN.
Link Quality See Status
column
Access Point
or Client
Bridge Mode
Shows the strength of the link between the OM2P
and the network.
G = good quality (green).
Y = medium quality (yellow).
R = poor or no link (red).