User's Manual

8.1.2 Client Bridge Mode
Client Bridge Mode lets you connect two LAN segments via a wireless link as though they are
on the same physical network. Since the computers are on the same subnet, broadcasts will
reach all machines. As a result, DHCP information generated by the server will reach all client
computers as though the clients resided on one physical network.
The following figure shows an example of an OM2P communicating with an Access
Point/Wireless Router, such as the EnGenius EOA7530, operating in Client Bridge Mode.
The sections that follow the figure below describe how to configure your OM2P for Client
Bridge Mode.
Wireless Mode Wireless mode supports 802.11b/g/n mixed modes.
SSID Specify the SSID if known. This field is completed automatically if
you select an Access Point in the Site Survey.
Site Survey Scans nearby locations for Access Points. You can select a