User's Manual

8.1.4 Client Router Mode
In Client Router Mode, you can access the Internet wirelessly with the support of a WISP. In AP
Router Mode, the OM2P can access the Internet via a cable or DSL modem. In this mode, the
OM2P can be configured to turn off the wireless network name (SSID) broadcast, so that only
stations that have the SSID can be connected. The OM2P also provides wireless LAN
64/128/152-bit WEP encryption security, WPA/WPA2, and WPA-PSK/WPA2-PSK
authentication, as well as TKIP/AES encryption security. It also supports VPN pass-through for
sensitive data secure transmission.
The following figure shows an example of an OM2P communicating with a Wireless ISP (WISP)
Access Point in Client Router Mode. The sections that follow the figure below describe how to
configure your OM2P for Client Router Mode.
Wireless Mode Wireless mode supports 802.11b/g/n mixed modes.
SSID Specify the SSID if known. This field is completed automatically if
you select an Access Point in the Site Survey.
Site Survey Scans nearby locations for Access Points. You can select a
discovered Access Point to establish a connection.