User's Manual
8.2 Wireless Security Settings
The Wireless Security Settings section lets you configure the EOH200’s security modes: WEP,
WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly
recommend you use WPA2-PSK.
8.2.1 WEP
Security Mode Select WEP from the drop-down list to begin the configuration.
Auth Type Select Open System or Shared.
Input Type Select an input type of Hex or ASCII.
Key Length Level of WEP encryption applied to all WEP keys. Choices are
Select a 64/128/152-bit password lengths.
Default Key Specify which of the four WEP keys the OM2P uses as its default.
Key1 Specify a password for security key index No.1. For security, each
typed character is masked by a dot (
l
).
Key2 Specify a password for security key index No.2. For security, each
typed character is masked by a dot (
l
).
Key3 Specify a password for security key index No.3. For security, each
typed character is masked by a dot (
l
).
Key4 Specify a password for security key index No.4. For security, each
typed character is masked by a dot (
l
).