User's Manual

8.5 Wireless MAC Filter
Wireless MAC Filters are used to allow or deny network access to wireless clients according to
their MAC addresses. You can manually add a MAC address to restrict the permission to
access OM2P. The default setting is Disable Wireless MAC Filters.
0.
ACL Mode Determines whether network access is granted or denied to
clients whose MAC addresses appear in the MAC Address table
on this page. Choices are Disable, Deny MAC in the list, or
Allow MAC in the list.
MAC Address Filter Enter the MAC address of the device.
Add Click Add to add the MAC address to the MAC Address table.
Apply Click Apply to apply the changes.