User's Manual

Chapter 9 LAN Setup
This chapter describes the OM2P Local Area Network (LAN) settings.
9.1 IP Settings
This section is only available for Non-Router Mode. IP settings lets you configure the OM2P
LAN port IP address.
IP Network Setting Select whether the OM2P IP address will use the static IP address
specified in the IP Address field or be obtained automatically
when the OM2P connects to a device that has a DHCP server .
IP Address Enter the IP address of the OM2P.
IP Suet Mask Enter the OM2P subnet mask.
Default Gateway Enter the OM2P default gateway.
Primary DNS Enter the OM2P primary DNS.
Secondary DNS Enter the OM2P secondary DNS.
Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and
return previous settings.
If you change the LAN IP address, you will be directed to the new IP address after you click
Apply.