User's Manual

setting that is too low can prevent the OM2P from establishing
some connections.
Login Enter the Username provided by your ISP.
Password Enter the Password provided by your ISP.
Service Name Enter the Service Name provided by your ISP.
Connect on Demand Select the radio button to specify the maximum idle time.
Internet connection will disconnect when it reach the maximum
idle time, but it will automatically connect when user tries to
access the network.
Keep Alive Select whether to keep the Internet connection always on, or
enter a redial period once the internet lose connection.
Get Automatically
From ISP
Select whether to obtain the DNS automatically from the DHCP
server.
Use These DNS Servers Click the radio button to set up the Primary DNS and Secondary
DNS servers manually.
Discard Ping on WAN Check to Enable to recognize pings on the OM2P WAN interface
or Disable to block pings on the OM2P WAN interface. Note:
Pinging IP addresses is a common method used by hackers to
test whether the IP address is valid. Blocking pings provides some
extra security from hackers.
Accept / Cancel Click Accept to confirm the changes or Cancel to cancel and
return previous settings.
Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see
section 4.1).