User's Manual

Chapter 11 Management Settings
The Management section lets you configure administration, management VLAN, SNMP
settings, backup/restore settings, firmware upgrade, time settings, and log settings. This
chapter describes these settings.
11.1 Administration
Click the Administration link under the Management menu to change the user name and
password used to log on to the OM2P Web Configurator . The default user name is admin
and the default password is admin. Changing these settings protects the OM2P configuration
settings from being accessed by unauthorized users.
Name Enter a new username for logging in to the Web Configurator.
Password Enter a new password for logging in to the Web Configurator
Confirm Password Re-enter the new password for confirmation.
Remote Management Enable or disable remote management.
Remote Upgrade Specify whether the OM2P firmware can be upgraded remotely.
Remote Management
Port
If remote management is enabled, enter the port number to be
used for remote management. For example: If you specify the
port number 8080, enter http://<IP address>:8080 to access