User's Manual

Chapter 12 Network Configuration Examples
This chapter provides step-by-step descriptions for using the OM2P’s operating modes. The
Access Point Mode’s default configuration allows the OM2P to act as a central unit of a WLAN
or as a root device of a wired environment. Repeater mode and Mesh network mode are
reserved for future configuration.
12.1 Access Point
Access Point
Step1 Log in to the Web Configurator with your browser by entering
the default IP address 192.168.1.1
Step2 Select your country or region’s regulation.
Step3 Use site survey to scan channels available in nearby areas.
Step4 Select channel with less interferences.
Step5
Specify the SSID for your broadcast SSID and you can also
configure multiple SSID at the same time.
Step6 Verify the VLAN identifier to separate services among clients
Step7 Set the authentication settings.
Step8 Click Apply to save all changes.
For more advanced settings, refer to the previous chapters.