User's Manual

12.3 WDS Bridge Mode
Use this feature to link multiple Access Points in a network. All clients associated with any
Access Points can communicate with each other in an ad-hoc manner.
WDS Bridge
Step1 Log in to the Web Configurator with the default IP address
192.168.1.1
Step2 Select your country or region’s regulation.
Step3 For Operation Mode, select WDS Bridge from System
Properties.
Step4 Select the channel you want to use.
Step5 Set up the authentication settings
Step6 Set up WDS Link Settings.
Step7 Specify the MAC address of the Access Point with which you want
to connect.
Step8 Click Apply to save all changes.
Each WDS bridge device must use the same Subnet, Wireless Mode, Wireless
Channel, and Security Setting.