Manualshelf

User's Manual

ManualsBrandsDatto ManualsElectronicsWireless 802.11b/g/n Mesh Router
51525354555657585960
Internet C
o
nn
ec
t
i
o
n
Ty
p
e
Select Static IP to begin configuration of the Static IP connection.
Account Name Enter the account name provided by your ISP.
Domain Name Enter the domain name provided by your ISP.
MTU Specify the Maximum Transmit Unit size. It is recommended you
accept the default setting of Auto. Otherwise, packets will be
fragmented downstream if the MTU is set too high or too low,
which impacts network performance. In extreme cases, an MTU
setting that is too low can prevent the OM2P-LC/OM2P-HS from
establishing some connections.
IP Address Enter the WAN port IP address.
I
P
Subnet Mask Enter the WAN IP subnet mask.
Gateway IP Address Enter the WAN gateway IP address.
Primary DNS Enter the primary DNS IP address.
Secondary DNS Enter the secondary DNS IP address.
Discard Ping on WAN Check to Enable to recognize pings on the OM2P-LC/OM2P-HS
WAN interface
or Disable to block pings on the OM2P-LC/OM2P-HS WAN
interface. Note: