User's Manual

!
17!
Troubleshooting with your device with lights
The lights on your Cloudtrax-compatible device can tell you a lot about how that device is
functioning. For example, when you are looking at the front of an OM2P, you will see (from right
to left):
1. Power light
2. Ethernet port 1 link light
3. Ethernet port 2 link light
4. Mesh quality light (signal bars)
The mesh quality light will show three colors: red, yellow and green. Gateways act differently
than repeaters, as shown below:
Gateway:
• No color until DHCP address received
• Red solid if Internet check fails,
• Green blink if Internet works
Repeater:
• No color until speed test
• Red solid if speed is less than 1 Mbps
• Yellow solid if speed is between 1 Mbps and 2.5 Mbps
• Green blink if speed is greater than 2.5 Mbps