System information

24
Amp
Tempest
Amp
Feedback: 0…127—The left audio output of each voice can
feedbackintothesignalpathpre-lter.Dependinguponthe
amount of feedback, this can result in anything from a pleas-
ing fuzzy distortion-like sound to unpredictable harmonic
squealing and widespread pandemonium. A setting of 0
prevents any of the signal from feeding back. See “Tempest
VoiceArchitecture”onpage17formoreinformation.
Note: Because the feedback loop is taken from the left output, pan settings and
modulation will affect the behavior and level of feedback, so be careful (and
maybe turn down your monitors/headphones while tweaking?)!
Volume: 0…127—Sets the volume of the current sound before it is sent to the
mixer.
Note: Volumelevelcanbeset,oraffectedbymodulation,atseveralpointsin
the signal path, so clipping distortion may occur if the levels and/or modulation
amounts are set high. If clipping is undesirable, simply turn the level and/or mod
amount down until it stops clipping.